PUBLICATII

 

Alexandru Mihail Morega

 

Profesor,

Catedra de Masini, Materiale si Actionari Electrice

Facultatea de Electrotehnica,

Universitatea POLITEHNICA din Bucuresti

Director,

            Departamentul de Bioinginerie si Biotehnologie, UPB

Cercetator (1/2 norma)

            Institutul de Statistica Matematica si Matematica Aplicata Gh. Mihoc – C. Iacob al Academiei Romane

 

Teze de doctorat

1.     Electromagnetic methods in the metallurgical technologies of composite materials, Electrical Engineering, Universitatea POLITEHNICA din Bucuresti, 1987.

2.     Optimal Geometries of Electronic Packages Cooled by Forced Convection, Mechanical Engineering, Duke University, Durham, NC, USA, 1993.

 

Lucrari publicate

 

Reviste cu recenzori

1.      Morega, Al.M., Ordonez, J.C., Vargas, J.V.C., and Kosaraju, S., A finite element method (FEM) analysis and optimization of a PEM fuel cell with interdigitated flow field design, Int. J. Energy Technologies and Policy (accepted), 2007.

2.      Masson P.J., Tixador P., Ordonez J.C., Morega A.M. and Luongo, C.A. Electro-Thermal Model for HTS Motor Design, IEEE transactions of applied superconductivity (accepted), 2006.

3.       Morega, Al.M. and Bejan, A., A Constructal Approach to the Optimal Design of Photovoltaic Cells, I. Journal of Green Energy, 2, 3, pp. 233-242, 2005.

4.       Morega, Al.M. and Morega, M., A FEM analysis of Magnetically induced biomagnetic fluid mixing, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 50, 2, pp. 239-248, 2005.

5.       Mocanu D., Kettenbach, J., Eisenberg, S., Morega, Al.M., and Morega, M., Nonsmooth regularization in electrocardiographic imaging, M., Rev. Roumaine Sci. Techn. Electrotech. et Energ, 50, 2, pp. 249-260, 2005.

6.       Morega, Al.M. si Morega, M., A constructal principle based optimal design for photovoltaic cell architectures, Romanian J. of Physics, 49, Nos. 9-10, pp.919-936, 2004.

7.       Nishimura, T. and Morega, Al.M., Influence of Lewis Number on Double-Diffusive Convection in a Square Cavity Filed with Binary Gas, Heat Transfer Assian Research (former Heat Transfer Japanese Research), pp. 85-97, 2003.

8.       Morega, Al.M., Double Diffusive Convection by a Chebyshev Collocation Method, in Studii de Termodinamica Aplicata, ed. V. Badescu and T. Prisecaru, Ed. Politehnica, 2003, p. 116, ISBN 9738449065.

9.       Morega, Al.M. and Morega, M., A FEM model for thermoelectric and thermomagnetic effects, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 48, 2-3, pp. 187-197, 2003.

10.    Nishimura, T., Bian, Y., Kunitsugu, K., and Morega, Al.M., Fluid flow and mass transfer in a sinusoidal wavy-walled tube at moderate Reynolds numbers, Trans. JSME, no. 01-1378, pp. 2349-2353 (180-185), 2002.

11.    Moraru, A., Panaitescu, A., Mocanu, D., Morega, Al.M., Panaitescu, I., Soci, A., Computational models for phenomena in aluminum electrolysis cells, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 47, 1, pp. 3-34, 2002.

12.    Nishimura, T. and Morega, Al.M., Influence of Lewis Number on Double-Diffusive Convection in a Square Cavity Filed with Binary Gas, Heat Transfer Asian Research (former Heat Transfer Japanese Research), pp. 63-75, 2001.

13.    Morega, Al.M., A numerical analysis of laminar transport processes in ducts with cross-sectional periodicity, Analele Universitatii Bucuresti, ano L (2001), pp. 159-168.

14.    Nishimura, T., Ogata Y., Sakura, S., Morega, Al. M. and Gotoh, K., Traveling plumes generated within a double-diffusive interface between counter shear flows, Phys. of Fluids, 12, 11, pp. 3078-3081, Nov. 2000.

15.    Nishimura, T. and Morega, Al.M., Direct simulation of layer merging in a salt-stratified system, Numerical Heat Transfer, Part A, 37, pp. 323-341, 2000.

16.    Nishimura, T. and Morega, Al.M., Oscillatory natural convection by combined heat and mass transfer, Trends Heat Mass & Momentum Transf., 6, pp. 51-62, 2000.

17.    Nishimura, T., Ogata Y., Sakura, S. and Morega, Al. M., Interfacial breakdown of double-diffusive convective layers by a horizontal temperature gradient, Int. J. Heat Mass Transf., 42, pp. 1479-1489, 1999.

18.    Nishimura, T., Sakura, S. and Morega, Al.M., Traveling plumes within a double-diffusive interface under a horizontal temperature gradient, pp. 9-11, no.16, Album of Visualization, The Visualization Society of Japan, ISSN 0919-4630, 1999.

19.    Nishimura, T, Wakamatsu, M. and Morega, Al. M., Oscillatory double-diffusive convection in a rectangular enclosure with combined horizontal temperature and concentration gradients, Int. J. Heat Mass Transf., 41, no. 11, pp. 1601-1611, 1998.

20.    Morega, Al. M., Nishimura, T., Panaitescu, A. and Paceagiu B., Magnetic field influence on double-diffusive convection transport processes, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 43, 4, pp. 1998.

21.    Nishimura, T., Kunitsugu Koji, and Morega, Al. M., Fluid mixing and mass transfer enhancement in grooved channels, J. of Enhanced Heat Transfer, vol. 5, pp. 23-37, 1998.

22.    Nishimura, T. and Morega, Al.M., Influence of Lewis Number on Double-Diffusive Convection in a Square Cavity Filed with Binary Gas, Trans. JSME, 64, 626 B, 10, pp. 3423-3429, 1998.

23.    Moraru A., Panaitescu I., Panaitescu A., Mocanu D., and Morega, Al. M. On the current field in the aluminum reduction cell, Revue Roum. Sci. Tech.-Electrotechn. et Energ., Vol. 43, 4, pp. 473-484, Bucharest, 1998.

24.    Nishimura, T., Morega, Al. M. and Kunitsugu Koji, Vortex structure and fluid mixing in pulsatille flow through periodically grooved channels at low Reynolds numbers, JSME Int. Journal, B, vol. 40, no. 3, pp. 377-385, 1997.

25.    Morega, Al. M., Lohan, F. and Minciunescu, P., Preprocesor pentru un pachet de programe de element frontier 2-D, EEA-Electrotehnica, nr 1-2, 1997.

26.    Ledezma, G., Morega, Al. M. and Bejan, A, Optimal spacing between pin fins with impinging flow, J. Heat Transfer, 118, pp. 570-577, 1996.

27.    Morega, Al. M. and Nishimura, T. Double-diffusive convection by a Chebyshev collocation method, Technology Reports of Yamaguchi University, 5, pp. 259 - 276, 1996.

28.    Morega, Al. M., Cioc”rlan, B. and Minciunescu, P., On optimal transcutaneous pacing;  an electrokinetic approach, Rev. Roumaine Sci. Techn. Electrotech. et Energ. (”n englez), 41, 1, pp. 13 - 22, 1996.

29.    Morega, Al. M., Mocanu, D. and Morega, M., Eigenvalue cardiography, Rev. Roumaine  Sci. Techn. Electrotech. et Energ., vol. 41, 2, pp. 169 - 178, 1996.

30.    Morega, Al. M., An introduction to Duke University educational computing, Yamaguchi University Journal, no. 5, pp. 23 - 28, Ube, Japan, 1996.

31.    Morega, M., Morega, Al., M. Procedeu tehnic si model matematic pentru stimularea pe cale magnetic a sistemului nervos, EEA Electrotehnica, 44, nr. 9-10, 1996.

32.    Morega, Al. M., Bejan, A. and Lee, S. W., Free stream cooling of a stack of parallel plates, Int. J. of Heat and Mass Transfer, 38, no. 3, pp. 519-531, 1995.

33.    Morega, Al. M., Vargas, J. V. C. and Bejan, A., Optimization of pulsating heaters in forced convection, Int. J. of Heat and Mass Transfer, 38, no. 16, pp. 2925-2934, 1995.

34.    Mocanu, C. I. and Morega, Al. M., Electromagnetic energy and momentum theorems for nonlinear and moving media, Rev. Roumaine  Sci. Techn. Electrotech. et Energ., 40, 1, pp. 3-14, 1995.

35.    Mocanu, C. I., Morega, Al. M., Morega, M.,  On the difficulties of Thomas-Wigner Rotation, Hadronic Journal, 16, pp. 63 - 96, 1995 (citat ”n Phisics Abstracts ISSN 0036-8091, Science Abstracts, series A, 15th Sept. 1995).

36.    Bejan, A. and Morega, Al. M., The optimal spacing of a stack of parallel plates cooled by turbulent forced convection, TN, Int. J. of Heat and Mass Transfer, 37, pp. 1045-1048, 1994.

37.    Bejan, A., Kim, S. J., Morega  Al. M., and Lee, S. W.,  The cooling of stacks of boards shielded by porous screens, Int. J. Heat and Fluid Flow, 1994.

38.    Morega, Al., M. and Morega, M., Forced convection boundary layer with superposed magnetic field, Rev. Roumaine  Sci. Techn. Electrotech. et Energ., 39, 2, pp. 155-163, 1994.

39.    Morega, Al. M. and Bejan, A., The optimal spacing of parallel boards with discrete heat sources cooled by laminar forced convection, Numerical Heat Transfer A, Applications, 25, pp. 373 - 392, 1994.

40.    Morega, Al., M. and Bejan, A., Heatline visualization of forced convection in porous media, Int. J. Heat and Fluid Flow, 15, 1, pp. 42 - 47, 1994.

41.    Bejan, A., and Morega, Al. M., Optimal arrays of pin fins and plate fins in laminar forced convection, J. Heat Transfer, 115, pp. 75 - 81, 1993.

42.    Bejan, A., Morega Al. M., Lee, S. W. and Kim, S. J., The cooling of a heat generating board inside a parallel-plate channel, Int. J. Heat and Fluid Flow, 14, 2, pp. 170 – 176, 1993.

43.    Morega, Al. M., Filip, A. M., Bejan, A. and Tyvand, P. A., Melting around a rotating shaft embedded in a phase-change material, Int. J. Heat and Mass Transfer, 36, pp. 2499 - 2509, 1993.

44.    Morega, Al., M. and Bejan, A., Heatline visualization of the forced convection laminar boundary layers, Int. J. Heat and Mass Transfer, 30, pp. 3957 - 3967, 1993.

45.    Bejan, A. and Morega, Al. M., Thermal contact resistance between two flat surfaces that squeeze a film of lubricant, TN, J. Heat Transfer, 36, pp. 763 - 767, 1993.

46.    Mocanu, C. I., Morega, M., Morega, Al. M., On the Thomas Rotation Paradox, Hadronic Journal, 16, pp. 295 - 329, 1993.

47.    Morega, Al. M. and Minciunescu, P., Electrostatic modeling of a cap-rod insulators family, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 37, 4, pp. 445 - 456, 1992.

48.    Ioan, D. C. and Morega, Al. M., Instalatie de laborator pentru studiul solidificarii controlate a materialelor metalice, EEA-Electrotehnica, 37, 1, pp. 28 - 35, 1989.

49.    Morega, Al. M., Magnetic field influence on the convective heat transfer in solidification processes. I, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 33, 1, pp. 33-39, 1988.

50.    Morega, Al. M., Magnetic field influence on the convective heat transfer in solidification processes. II, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 33, 2, pp. 155-166, 1988.

51.    Morega, Al. M., The heatfunction approach to the thermo-magnetic convection of electro-conductive melts, Rev. Roumaine Sci. Techn. Electrotech. et Energ., 34, 4, pp. 359-368, 1988.

 

Bb Lucrari la conferinte internationale (Proceedings)

 

1.     Morega, A.M., Ordonez, J.C., Vargas, J.V.C., Luongo, C.A., Shih, C., Engineering Education Solutions to a Global Economy ICEE 2007 International Conference on Engineering Education – Coimbra, Portugal Sept. 3-7, 2007, (acceptat)

2.     Ordonez J. C., Vargas J.V.C., Morega A.M., Luong C.A., Shi C., International Capstone Senior Design Projects, Fifth LACCEI International Latin American and Caribbean Conference for Engineering and Technology (LACCEIÕ2007), Developing Entrepreneurial Engineers for the Sustainable Growth of Latin America and the Caribbean: Education, Innovation, Technology and Practice, 29 May  – 1 June 2007, Tampico, MŽxico. (acceptat)

3.     Cheţan, M., Morega, Al.M., Medical data transfer technologiesÕ, ATEEÕ06, Bucuresti, 24 Nov., 2006.

4.     Negoiaş, A.P., Morega, A.M. and Ordonez, J.C.,Heat transfer in spherical photovoltaic cells, ATEEÕ06, Bucuresti, 24 Nov., 2006.

5.     Morega, Al.M., Panaitescu, A., Petre, M., Current Flow and Heat Transfer in Aluminum Electrolysis Cell – A FEM Analysis, ATEEÕ06, Bucuresti, 24 Nov., 2006.

6.     Morega, Al.M., Ordonez, J.C., Negoias, P.A., Morega, M., and Hovsapian, R., Optimal electrical design of spherical photovoltaic cells, COMSOL Conference, Congress Center of the Czech Technical University, Prague, October 26, 2006.

7.     Morega, Al.M., Ordonez, J.C., Constructal Design of Concurrent Power Distribution Networks, COMSOL Conference, Boston, October 20-21, Hyatt Regency, Cambridge, Boston, MA, 2006.

8.     Morega, Al.M., Ordonez, J.C., A higher resolution, local thermal analysis of an AC armature winding of a high temperature superconductor motor, Paper IMECE2006-13825, Thermal model for the AC armature winding of a High Temperature Superconductor airborne motor, 2006 ASME International Mechanical Engineering Congress and Exposition, IEMEC-2006, Nov. 5-10, Chicago, Illinois, USA.

9.     Vargas, J.V.C., Ordonez, J.C., Morega, Al.M, Luongo, C., and Shih, C., Paper GC 2006-40: Bringing international components to capstone senior design projects-preparation for a global economy, 5th American Society for Engineering Education (ASEE) Global Colloquium on Engineering Education, October 9-12, 2006, Rio de Janeiro, Brazil.

10.  Morega, Al.M., Negoias, A.P., Heat transfer in spherical Photovoltaic cells, Mathematical Modeling of Environmental and Life Sciences Problems, 4th Workshop, 10-12 September, 2006, Constanta, Romania.

11.  Popescu, A., Morega, Al.M., Computation of postsynaptic transmembrane currents and membrane potential in the nicotinic synapse, Mathematical Modeling of Environmental and Life Sciences Problems, 4th Workshop, 10-12 September, 2006, Constanta, Romania.

12.  Mocanu, D., Morega, M., Morega, A.M., A simulation study of electrical rythms in a paced cardiac fiber, Mathematical Modeling of Environmental and Life Sciences Problems, 4th Workshop, 10-12 September, 2006, Constanta, Romania.

13.  Faur, S.C., Morega, Al.M., Magnetic Stimulation of Ulnar and Median Nerves in Human Wrist, Mathematical Modeling of Environmental and Life Sciences Problems, 4th Workshop, 10-12 September, 2006, Constanta, Romania.

14.  Masson, P.J., Tixador, P., Ordonez, J.C., Luongo, C.A., Morega, Al.M., Electro-Thermal sizing model for HTS motor design, Applied Superconductivity Conference, ASCÕ06, Aug. 27 – Sept. 1, Seattle, WA, USA.

15.  Ordonez, J.C., Vargas, J.V.C., Morega, Al.M, Luongo, C., and Shih, C., An international component to capstone senior design projects, SC.3: Globalization, 36th Annual Frontiers in Education Conference, Borders: International, Social and Cultural, FIE 2006, San Diego, California, 28-31 October, USA.

16.  Morega, A.M., Ordonez, J.C., Negoias, A.P. and Hovsapian R., Spherical photovoltaic cells – A constructal approach to their optimization, OPTIM 2006, May 2006, Brasov, Romania.

17.  Morega, M., Mogos, L. Morega, A.M., Optimal design for hypethermia applicator, OPTIM 2006, May 2006, Brasov, Romania.

18.  Kosaraju, S.C., Ordo–ez, J.C., Morega, Al.M., A numerical study of the effect of channel geometry on the pressure distribution in pemfc bipolar plates, FLUENT-UGMÕ06, Sinaia, Romania.

19.  Mathur, M., Negoias, A.P., Ordo–ez, J.C., Morega, Al.M., Thermal stability of an hts ac armature winding, FLUENT-UGMÕ06, Sinaia, Romania.

20.  Morega*, Al.M., Faur S.C., Morega, M., Magnetic field control on magnetic fluid micro-channel flow, FLUENT-UGMÕ06, Sinaia, Romania.

21.  Ordonez, J.C., Morega, A.M., Mathur, M., Masson, P., Air Gap Armature Thermal Model of a High Temperature Superconducting 
Motor for Electric Ship Propulsion, Workshop on simulation based design for electric war ships, Electric Ship Research and Development Consortium (ESRDC), ONR, CAPS, FSU, USA, Feb.14-15, 2006.

22.  Morega, Al.M., Morega, M., Faur, S.C., Magnetically Induced Biomagnetic Fluid Mixing FEM Model, 3rd European Medical and Biological Engineering Conference EMBEC'05&IFMBE, 20-25 Nov. 2005, Praga, Rep. Ceha, IFMBE Proceedings CD-ROM ISSN 1727-1983.

23.  Morega, M., Morega, Al.M., Machedon, A. Simplified Numerical Models for Microwave Dosimetry in Human Tissue, 3rd European Medical and Biological Engineering Conference EMBEC'05&IFMBE, 20-25 nov. 2005, Praga, Rep. Ceha, IFMBE Proceedings CD-ROM ISSN 1727-1983.

24.  Morega, Al.M., Ordonez, J.C., Thermal Stability of an HTS AC Armature Winding, FEMLAB Conference, Boston, October 23-25, Hyatt Regency, Cambridge, Boston, MA, 2005.

25.  Morega, Al.M., Mocanu, D., Neagu, M., Morega, M., Stelescu, M., Interferential Electrical Stimulation of Excitable Tissues, Mathematical Modeling of Environmental and Life Sciences Problems, 3rd Workshop, 7-10 September, 2005, Constanta, Romania.

26.  Popescu, A., Morega, Al.M., Post-Synaptic Nicotinic Currents Triggered by the Acetylcholine Distribution within the Synaptic Cleft, Mathematical Modeling of Environmental and Life Sciences Problems, 3rd Workshop, 7-10 September, 2005, Constanta, Romania.

27.  Morega, Al.M., Faur, S.C., A Mathematical Model of a Magnetically Driven Micro-Mixing Device and its Numerical Analysis, Mathematical Modeling of Environmental and Life Sciences Problems, 3rd Workshop, 7-10 September, 2005, Constanta, Romania.

28.  Negoias, A.P., Morega, Al.M., Constructal Optimization of Spheral Photovoltaic Cells, Mathematical Modeling of Environmental and Life Sciences Problems, 3rd Workshop, 7-10 September, 2005, Constanta, Romania.

29.  Popescu, S., Morega, Al.M., Demetrescu, I., Correlation between metallic materials surface preparation and biocompatibility, The International Conference on Structural Analysis of
 Advanced Materials, 
ICSAM 2005, September 15-17, Bucharest, 2005.

30.  Morega, Al.M., Ordonez, J.C and Vargas, J.V.C., Thermal model for the AC armature winding of a High Temperature Superconductor airborne motor, 2005 ASME International Mechanical Engineering Congress and Exposition, IEMEC-2005.

31.  Popescu, A., Morega, Al.M, Acetylcholine Diffusion within the Synaptic Cleft, ATEE-2004.

32.  Faur, S.C., Morega, Al.M., Magnetic mixing of a biomagnetic fluid, ATEE-2004.

33.  Neagu, M., Morega, Al.M., Radiofrequency electromagnetic field exposure and heating of human tissue, ATEE-2004.

34.  Capitanoiu, B, and Morega, Al.M., Thermal efects of corrective Lasik surgery ATEE-2004

35.  Morega, Al.M. and Morega, M. A FEM simulation of biomagnetic fluid mixing, BioMedÕ04, Bucuresti, 5-7 Nov. 2004.

36.  Morega, Al.M., Manescu, V. and Paltanea, G., A FEM model for a static piezoelectric actuator, Int. Scientific Workshop on Materials for Electrical Engineering, MMDE 26-28 May 2004.

37.  Faur, S. and Morega, Al.M., A FEM analysis of biomagnetic fluid flow in a rectangular duct under the influence of a magnetic field, 4th European Symposium on Biomedical Engineering, June 25-27, 2004, Univ. of Patras Patras, Grecia, 2004.

38.  Popescu, A. and Morega, Al.M., Acetylcholine diffusion within the synaptic cleft – a numerical study, Mathematical Modlling of Environmental and Life Sciences Problems, 3rd Workshop, 27-30 May, 2004, Constanta, Romania.

39.  Morega, Al.M. and Faur, S., A numerical model for the blood flow – magnetic field interaction, Mathematical Modeling of Environmental and Life Sciences Problems, 3rd Workshop, 27-30 May, 2004, Constanta, Romania.

40.  Capitanoiu, B. and Morega, Al.M. Thermal effects of corrective of cornea laser surgery, Mathematical Modeling of Environmental and Life Sciences Problems, 3rd Workshop, 27-30 May, 2004, Constanta, Romania.

41.  Morega, Al.M. and Morega, M., A FEM Analysis of Thermoelectric and Thermomagnetic Phenomena of Solids, OPTIM 2004, May 2004, Brasov, Romania.

42.  Morega, Al.M., and Nishimura, T., Combined heat and mass double-diffusive natural convection, ICHMT Int. Symposium Transient convective heat and mass transfer in single and two-phase flows, TRCON-03, 17-22 August 2003, key lecture, Cesme, Turkey.

43.  Marinoschi, G. and Morega, Al.M., Water infiltration, 2nd Workshop on mathematical modeling of environmental and life sciences problems 4-5 July, 2003 Bucharest, Romania.

44.  Popescu, A. and Morega, Al.M., Current and voltage distribution within the synaptic cleft, 2nd Workshop on mathematical modelling of environmental and life sciences problems 4-5 July, 2003 Bucharest, Romania.

45.  Marinoschi, G. and Morega, Al.M., On the boundary value problem of water infiltration into a nonhomogeneous unsaturated soil, Annual Conference of the Gesellschaft fŸr Angewandte Mathematik und Mechanik, GAMM, March 24-28, 2003.

46.  Morega, Al. M. and Nishimura, T., Double-diffusive convection in rectangular enclosures with magnetic field, Proc. Workshop on Num. Methods in Fluid Mech. And Fluent Applications, Timisoara, May 22-23, 2003, pp. 212-221,Ed. Orizonturi Universitare, ISBN 973-638-022-X.

47.  Mocanu, D., J. Kettenbach, Eisenberg, S.R., Morega, Al.M. A Total Variation Approach to Inverse Electrocardiography, 2nd European Medical & Biological Engineering Conference, December 4-8, 2002, Paper no. 1339, Vienna.

48.  Morega, Al.M., A FEM study on double-diffusive convection in rectangular enclosures, FLUENT – UGM 2002, 31 Oct. – 1 Nov., 2002, Salonic, Greece (CD-ROM).

49.  Morega, A.,M., Bejan, A., The constructal approach to optimization volume to point conduction problems, 1st Workshop on Mathematical Modelling of Environmental Problems, Romanian Academy, Proceedings, pp.97-111, Ed. Academiei, ISBN 973-27-0934-0, 2002

50.  Moraru, A., Panaitescu, A., Morega, Al.M., Panaitescu, I., Soci, A., Computational models for phenomena in aluminum electolysis cells, International Conference on Computational and Mathematical Methods in Science and Engeneering CMMSE-2002, Alicante, Spania.

51.  Morega, Al.M., Bejan, A. The constructal approach to optimization volume to point conduction problems, Mathematical Modeling of Environmental Problems, 1st Workshop, 17-21 June, 2002, Bucharest, Romania – Romanian Academy, Section of Mathematical Sciences, the Institute for Mathematical Statistics and Applied Mathematics Gheorghe Mihoc – Caius Iacob Bucharest, Romania and Forschungszentrum JŸlich, Institute of Chemistry and Dynamics of Geosphere – Institute IV: Agrosphere, JŸlich, Germany.

52.  Morega, Al.M. and Bejan, A., A Constructal Approach To The Optimal Design Of Photovoltaic Cells And Modules, OPTIM 2002, May 16-17, 2002, Brasov, 1H.2, p. 251-256.

53.  Morega, M., Morega, Al.M. and Machedon, A., Biomedical Engineering as an Educational Option at the Faculty Of Electrical Engineering, OPTIM 2002, May 16-17, 2002, 5Ed.5, p. 885-890.

54.  Morega, Al.M., Nishimura, T., Laminar transport processes in ducts with cross-sectional periodicity, Second Southeastern Europe Users Group Meeting, Bucharest 2001 (CD-ROM).

55.  Morega, Al.M., Mocanu, D. and Morega, M., A numerical approach to the 3d-reconstruction of the human thorax and the solution to the inverse problem of electrocardiography, EUROSIM-BIOSIM 2001, Delft, Holland, paper 160.

56.  Morega, Al.M., Mocanu, D. and Panaitescu, A., An ANSYS approach to the numerical modeling of electrical and heat transfer processes in 88kA HALL-HEROULT Electrolysis Cells, ANSYS 2000 Conference, Pittsburgh, VA, USA, 28Aug. 2000.

57.  Morega Al. M., Mocanu D., Morega M. – A 3D Realistic ANSYS Finite Element Reconstruction of the Human Thorax for the Extraction of the Transfer Coefficients for Electrocardiographic Lead Vectors, the 2000 ANSYS Inc. Conference and Exhibition, Aug 28-30, 2000, Pittsburgh, USA.

58.  Repetto, M., Panaitescu, I., Pericleous, K., Leboucher, L., Chechurin, V., Kalimov, A., Moraru, A., Panaitescu, A., Morega, Al.M., Mocanu, D.,  Optimisation of an electrolysis cell for aluminium production, OPTIM 2000, Braşov, 11-12 Mai 2000.

59.  Morega, Al.M., Moraru, A., and Panaitescu, A., A numerical study on the magneto-hydrodynamic oscillations in a 90 kA Hall-Heroult electrolysis cell, 9th International Symposium on Numerical Field Calculation in Electrical Engineering and TEAM Workshop, Sept. 11-14, 2000, Graz, Austria.

60.  Morega, Al.M., Electrical engineering in medical applications – an interdisciplinary undergraduate program, TABEMED 2-3 Iunie 2000, Universitatea Tehnica din Cluj-Napoca.

61.  Samfirescu Şt. and Morega, Al.M.A 3D anatomic reconstruction for ECGL/ECGP direct and inverse problems, ATEEÕ2000 Conference, POLITEHNICA Univ. of Bucharest, pp. 173-178, December 2000.

62.  Morega, Al.M., and Bejan, A., Constructal optimal design of the busbar and fingers network for photovoltaic cells and modules, ATEEÕ2000 Conference, POLITEHNICA Univ. of Bucharest, Decemeber 2000.

63.  Nishimura, T., Morega, Al.M., Kunitsugu, K., and Sakura, S., Direct simulation of double-diffusive convection in a salt-stratified system, Proc. of the 5th ASME/JSME Joint Thermal Engineering Conference, March 15-19, San Diego, CA, USA, pp. 1-8, (AJTE99-6376), 1999.

64.  Morega, Al. M. and Nishimura, T. A spectral snalysis of the Lewis number influence on the double-diffusive convection of a binary gas, The Institute of Mathematics and its Applications, IMA Conference on Mathematics in Heat Transfer, 29 June - 1 July 1998, pp. 243-250, University of Bradford, England.

65.  Mocanu, D., Morega, Al. M., Panaitescu, A., Panaitescu, I. and Moraru, A., Current flow and heat transfer processes in Aluminum electrolysis cells, 8th IGTE Symposium, pp. 462-467, Technical Univeristy of Graz, Austria, 1998.

66.  Mocanu, D. and Morega, Al.M., The extraction of the transfer coefficient for unipolar and bipolar electrocardiographic leads by using a 3D realistic finite element model for the human thorax, Advanced in Electrical Engineering, POLITEHNICA Univ. of Bucharest, 4-5 December 1998.

67.  Mocanu, D., Ioan, A. and Morega, Al.M., A comparative analysis of the Laplacian and potential inverse electrocardiographies, Advanced in Electrical Engineering, POLITEHNICA Univ. of Bucharest, 4-5 December 1998.

68.  Nishimura, T. and Morega, Al. M., Influence of Lewis number on double-diffusive convection in a square cavity filled with binary gas, 10th International Symposium on Transport Phenomena, Kyoto, Nov. 30 - Dec. 2, pp. 173-178, 1997, Japan.

69.  Minciunescu, P. and Morega, Al. M. Boundary Elements Method for Multi-Region Problems, 11th Conference on the Computation of Electromagnetic Fields, COMPUMAG, Rio de Janeiro, Nov. 2 - 6, 1997, Brazil.

70.  Morega, Al. M., Cioc”rlan, B., Morega, M. and H‰ncea, O., Magnetic excitation of heart, Proc. 18th Annual International Conference IEEE Engineering in Medicine and Biology Society, October 31 - November 3, 1996, Amsterdam, The Netherlands (CD-ROM, ISBN 90-901-0005-9-(CD-ROM) SOE 9609001).

71.  Morega, Al. M., Mocanu, D., Morega M. and Stefan, A., A dynamic model for cardiac defibrillation, Proc. 18th Annual International Conference IEEE Engineering in Medicine and Biology Society, October 31 - November 3, 1996, Amsterdam, The Netherlands (CD-ROM, ISBN 90-901-0005-9-(CD-ROM) SOE 9609001).

72.  Morega, Al. M. and Nishimura, T., Double diffusive convection by a Chebyshev collocation method, Proc. 14th Symposium on Turbulent Flows in Nishi-Nippon, Annual Summer Symposium, Japan, (4 pages) 1996.

73.  Morega, M. and Morega Al. M., Computation of power lines magnetic field, Proc. International Conference on Electro-Heat, ICEH'96, 28 - 29 Noiembrie, Sibiu, Romania, pp. 217 - 222, 1996.

74.  Nishimura, T., Kunitsugu, K. and Morega, Al. M., Fluid mixing and mass transfer enhancement in grooved channels for pulsatile flow, Proc. of the 3rd KSME-JSME Thermal Engineering Conference, Oct. 20-23, Kyongju, Korea, pp. I-471-476, 1996.

75.  Morega, Al. M., Mocanu, D. and Morega, M, A spectral approach to the cardiography, Proc. of The 12th Annual Review of Progress in Applied Computational Electromagnetics, ACES, the Naval Postgraduate School, Monterey, CA, USA, 1996, Biomedical Electromagnetics Section of the Proceedings, p. 1320-1326.

76.  Morega, Al. M., Cioc”rlan, B. and Morega, M., Optimal transcutaneous pacing, Proc. of The 12th Annual Review of Progress in Applied Computational Electromagnetics, ACES, the Naval Postgraduate School, Monterey, CA, USA, 1996, Biomedical Electromagnetics Section of the Proceedings, p. 1326-1333.

77.  Morega, Al. M., O analiza pseudo-spectrala a proceselor convective dublu-difuzive ”n incinte rectangulare, Sesiunea Jubiliara A 75-a Aniversare a Facultatii de Electrotehnică, Decembrie 1996, p. 8 - 19.

78.  Morega, Al., M., Mocanu, D., Morega, M. si Stefan A., Un model dinamic pentru defibrilarea cardiaca extracutanata, Sesiunea Jubiliara a 75-a Aniversare a Facultatii de Electrotehnica, Decembrie 1996, pp. 197 - 203, 1996.

79.  Mocanu, C. I. si Morega, Al. M., Proprietati dinamice ale c‰mpului electromagnetic - bilantul energetic, Sesiunea Jubiliara de Comunicari Electrotehnica - prezent si perspective, ICPE, Bucuresti, Octombrie 1995 (lucrarea invitata, 7 pagini, sesiune plenara, publicata ”n volum).

80.  Morega, Al. M. si Morega, M.  Racirea placilor ecranate electromagnetic, Sesiunea Jubiliara de Comunicari Electrotehnica - prezent si perspective, ICPE, Bucuresti, Octombrie 1995 , Lucrarea 14, Sectia ET (4 pagini).

81.  Morega, Al. M. si Morega, M., Răcirea pachetelor de placi ”n curgere externa, cu aplicatii ”n electronica, Sesiunea Jubiliara de Comunicari Electrotehnica - prezent si perspective, ICPE, Bucuresi, Octombrie 1995, Lucrarea 6, Sectia ET (4 pagini).

82.  Morega, Al., M. and Morega, M., Superimposed magnetic field in forced convection laminar boundary layer, Proc. of The 10th Annual Review of Progress in Applied Computational Electromagnetics, ACES, the Naval Postgraduate School, Monterey, CA, USA, 1994, Boundary Conditions Section of the Proceedings, pp. 511-515.

83.  Mocanu, C. I. and Morega, Al. M., Electromagnetic energy balance, the First International Workshop on Thermodynamics and Heat Transfer, Politehnica University of Bucharest, 30 Iunie - 2 Iulie 1994.

84.  Bejan, A. and Morega, Al. M., Heatline Visualization of Boundary Layers and Duct Flows, The International Conference on Flow Interaction, 1994, The University of Hong Kong, 1993, pp. 100 - 103.

85.  Morega, M. and Morega, Al. M., Transient leakage field in transformers with saturable magnetic core, Proceedings of the 7th Annual Review of Progress in Applied Computational Electromagnetics, ACES, the Naval Postgraduate School, Monterey, CA, USA, 1991, pp. 529-533

86.  Ioan, C. D., Morega, Al. M. si Stancu, C.,  LOCAP – logic circuit analysis program 7th International conference on control systems and computer science, Bucharest, 27–30 May 1987 Politehnic Institute of Bucharest, pp. 425–430.

87.  Ioan, D., C., Stancu, C. si Morega, Al., M., LOCAP – Program pentru analiza circuitelor logice, Conferinta Anuala de Semiconductoare, CAS'87, Sinaia, 1987, pp. 241–244.

 

 

Bc  Lucrari la conferinte nationale (in Proceedings-uri)

 

1.   Morega, Al.M., Ordonez, J.C., Negoias, A.P., A local thermal analysis of an AC armature winding of a High Temperature Superconductor motor, A 31-a Conferinta Nationala Caius Iacob de Mecanica Fluidelor, Modelare Matematica, Sisteme Dinamice Neliniare si Aplicatii in Tehnica, 19 – 21 Octombrie 2006, Brasov.

2.   Morega, Al.M., Ordonez, J.C., Negoias, A.P., Higher resolution thermal design of an HTS AC armature winding, Caius Iacob National Conference of Fluid Mechanics and Tehnical Applications, The Institute of Statistical Mathematics and Applied Mathematics, October 25-26, 2005, Bucharest, Romania.

3.   Morega, Al.M. si Morega, M., Arhitecturi optimizate pe baza principiului constructal in designul celulelor fotovoltaice, CNCSIS, Simpozionului National de Inginerie si Nanostiinte, Bucuresti, 23 aprilie 2004.

4.   Morega, Al.M. and Faur, S.C., A FEM analysis of biomagnetic fluid mixing in a rectangular cavity induced by the action of a magnetic field,

5.   Morega, Al.M. si Morega, M., Arhitecturi optimizate pe baza principiului constructal in designul celulelor fotovoltaice, CNCSIS –  Simpozionului National de Inginerie si Nanostiinte, Bucuresti, 23 aprilie 2004

6.   Bajenaru, E., Bucur, D., Bucur, C., Kostrakievici, S., Modreanu, M., Morega, Al.M., Pasat, S., Popescu, M., Precup, F., Vesa, C., Echipament computerizat de precizie folosit in recuperarea articulara a membrului inferior, Realizari RELANSIN, Electrotehnica, 2, 2003, pp. 29-43, Ed. Electra, Bucuresti, ISBN 973-8067-85-5

7.   Morega, Al.M., Structuri optimale pentru aplicatii de inginerie electrica si macanica, Electrotehnica – Solutii pentru dezvoltare durabila, TIBÕ2003, Bucuresti, 9 Oct. 2003

8.   Mocanu, D., Kettenbach, J, Eisenberg, S.R. and Morega, Al.M., A total variation approach to inverse electrocardiography, ATEEÕ2000 Conference, POLITEHNICA Univ. of Bucharest, CD-ROM, 29 Noiembrie. 2002.

9.   Samfirescu, C.S., Baboian, D, Capitanoiu, B, Morega, Al.M., Segmentation and 3D Reconstruction in Medical Imaging, ATEEÕ2000 Conference, POLITEHNICA Univ. of Bucharest, CD-ROM, 29 Noiembrie, 2002.

10.Morega Al.M., Mocanu D., Morega Mihaela - A 3-D reconstruction model of the human thorax for solving the inverse problem in electrocardiography (in Romanian), The National Symposium for Normal and Pathological Morphology, The Annual Session for Pathologic Anatomy, The Victor Babes Institute, Bucharest, 3-5 Nov  1999.

11.Morega, Al.M., Mocanu, D. si Panaitescu A., Analiza electrotermică a unei celule de electroliză a aluminiului, Conferinţa utilizatorilor Pro/ENGINEER si ANSYS din Rom‰nia, 16–17 Septembrie 1999, Sinaia.

12.Bala, C.V., Homentcovschi, D. si Morega, Al.M., Metoda si program de calcul pentru determinarea reactantei si fortelor electrodinamice de scurtcircuit ”n transformatoare, Conferinta Nationala de Electrotehnica si Energetica, Timisoara, 1982, pp. 91–108.

 

Carti

 

Ca. carti, monografii

1.     Morega, Al.M., Coordonator, Introducere ”n programare pentru control integrat, MatrixRom, 2005, 91 pag., ISBN97, 3-685-989-4

2.     Morega, Al.M., Ed. Introducere in imagistica medicala, ISBN 973-685-469-8, MatrixRom, 2002.

3.     Morega, Al.M., Principles of Heat Transfer, Chapter VII Mechanical EngineerÕs Handbook, Ed. D.B. Marghitu, Academic Press 2001, ISBN: 012471370X, pp. 446-557.

4.     Morega, Al. M.  Modelare numerică pentru probleme la limită ”n inginerie, 338 pp., MatrixRom, ISBN 973-9390-05-6, 1998.

5.     Morega, Al. M.  Optimal Geometries of Electronic Packages Cooled by Forced Convection, catalog 9404279, 154 pp. University Microfilms Inc. USA, 1993.

 

Cb.

1.  Morega, Al. M.  Elemente de modelare numerica pentru probleme la limita, Manual, 233 pp., Editura UPB, 1997.

2.  Morega, Al. M.  Electrotehnica si masini electrice, Curs, vol. 1, 166 pp., Editura IPB, 1989.

 

D.

1.     Morega, M., Morega, Al.M., Gheorghe, A., Machedon, A., Probleme de Bioinginerie. Modele numerice, MatrixRom, ISBN – 973-685-321-7, 160 pp, 2001.

2.     Vasiliu, St., Morega, Al.M.,Vasiliu, M.,  Field Analysis and Modelling.  Laboratory works, UPB, 1999.

3.     Morega, M. si Morega, Al. M.,  Modelare ”n bioinginerie.  ëndrumar de aplicaţii, 80 pp., UPB, 1998.

 

E.  Inventii si inovatii

 

1.   Bala, C., V., Rizeanu, M. si Morega, Al., M., Infasurari ”n galeti continui cu doua sau mai multe cai de curent ”n paralel, Brevet de inventie nr. 82124, OSIM, Romania.

 

F.  Granturi si contracte de cercetare

 

Fa (director, coordonator)

 

1.   BIOINGTEH – Platforma interdisciplinara pentru cercetare, dezvoltare si formare profesionala, grant CNCSIS, 54, 2006.

2.   MODMATDIF – Modelare matematica in procese de difuzie, CEEX – 2005-2007.

3.   Arhitecturi constructale pentru materiale si structuri utilizate in electrotehnica si electronica, grant CNCSIS A, Tema 32, cod 358, 2005, cod.

4.   C+ Centru de instruire pentru Programarea Aplicatiilor Industriale – Program PHARE, 2004-2005 – coordonator stiintific.

5.    Numerical modeling of physical processes associated to multifunctional materials and field-substance interactions – research resource development, grant CNCSIS E, 2004.

6.   Modelarea numerica a proceselor convectiv-difuzive in prezenta campului magnetic. Studii de magnetohidrodinamica cu aplicatii in electrotehnica, grant CNCSIS A, Tema 40, cod 540, 33552/2003.

7.   Formularea modelului fizico – matematic al curgerii  in canalul de test, in Studii si analize privind solutii tehnologice pentru realizare de filtre si sisteme de filtrare, in reprofilarea unei sectii care produce compozite si pulberi organice pentru productia de filtre si sisteme de filtrare, proiect Relansin nr. 1750/01.08.2003: Elaborare model numeric, 2004; Formularea modelului fizico-matematic al curgerii in canalul de test, 2003.

8.   Modelarea numerica a proceselor convectiv-difuzive in prezenta campului magnetic. Studii de magnetohidrodinamica cu aplicatii in electrotehnica, grant CNCSIS A, Tema 89, cod 129, 33784/2002.

9.   Apoptoza ”n adenoamele hipofizare. Implicatii ”n progresia tumorala si terapie, Programul VIASAN, Inst. Nat. de Cercetare-Dezvolt. ën domeniile patologiei si stiintelor biomedicale Victor Babes, 2001-2002

10. Modelarea numerica a proceselor convectiv-difuzive in prezenta campului magnetic. Studii de magnetohidrodinamica cu aplicatii in electrotehnica, grant CNCSIS A, Tema 39, cod 627, 34967/2001.

11.Perfectionarea ”nvatam‰ntului electric medical – program interdisciplinar de studii universitare, grant CNFIS II / Banca Mondiala, tema 89, 1998-2002.

12.Studii asupra proceselor difuziv-convective in tehnologiile specifice creşterii cristalelor pentru materiale electrotehnice si electronice, MCT, Cooperare Romania-Japonia, B3, A51, 1998-2001.

13.Procese convective difuzive naturale ”n incinte rectangulare, beneficiar Academia Rom‰na, Grant de cercetare 3042GR, a.a. 4062/03.11.1998, tema A4, 1998.

14.Analiza problemelor directa si inversa ”n electrocardiografie, grant CNCSU, contract 32, temele 62, 55, cod CNCSU 616, 705, 2-98-11, 1998-2001.

15.Cercetari privind c‰mpul electromagnetic ”n medii ”n miscare.  Versiunea nereciproca beneficiar Ministerul Cercetrii si Tehnologiei, Contract nr. 2-96-6, Tema A100, 1998.

16.Procese convective difuzive naturale ”n incinte rectangulare, beneficiar Academia Rom‰na, Grant de cercetare 3042GR, tema B6, 3-97-10, 1997.

17.Cercetari privind c‰mpul electromagnetic ”n medii ”n miscare.  Versiunea nereciproca beneficiar Ministerul Cercetrii si Tehnologiei, Contract nr. 2-96-6, 836/1, Tema A 98, 1997.

18.Realizari actuale ”n racirea structurilor electronice (componente, circuite si dispozitive), grant de cercetare, cod 4, CNCSIS, 1996.

19.Cercetari privind c‰mpul electromagnetic ”n medii ”n miscare.  Versiunea nereciproca:  Studiul calitativ al structurii defective a ecuatiilor Maxwell-Hertz, Contract 2-96-6, 836/1, Tema B58, 1996.

20.Cercetari privind c‰mpul electromagnetic ”n miscare neuniforma la viteze mari.  Calculul helmholtzian ”n exprimare intrinseca (vectoriala) si cinematica (cu relatii de transformare a coordonatelor spatio-temporale).  Particularitatile electrodinamicii mediilor ”n miscare si rotatia Thomas, beneficiar Ministerul Cercetrii si Tehnologiei, Contract nr. 2-94-4, 836, Tema A93, 1996.

21.Realizari actuale ”n racirea structurilor electronice (componente, circuite si dispozitive), grant de cercetare, cod 441, CNCSU, 4001, Tema A124, 1995.

22.Cercetari privind c‰mpul electromagnetic ”n miscare neuniforma la viteze mari. Calculul helmholzian ”n exprimare intrinseca (vectoriala) si cinematica (cu relatii de transformare a coordonatelor spatio-temporale), beneficiar Ministerul Cercetrii si Tehnologiei, Contract nr. 2-94-4, 510B, Tema B33, 1995.

23.Studiu computerizat pentru determinarea distributiei termice ”n servomotoarele sincrone fara perii si aplicatiile lor, Contract nr. 2-94-6 / 1994, beneficiar ICPE Bucuresti.

24.Cercetari privind c‰mpul electromagnetic ”n miscare neuniforma la viteze mari. Elaborarea electrodinamicii macroscopice hertziene compatibila cu teoria Maxwell-Hertz si complementara cu teoria relativitatii restr‰nse, beneficiar MCT, Contract nr. 2-94-4, 337C, Tema B2, 1994.

25.Pachet de programe electrotehnice pentru calculatorul FELIX M118, Contract nr. 3-5-3 / 1985, beneficiar Institutul pentru Tehnic de Calcul si Informatic, Bucuresti (ITCI).

 

Fb (participant)

 

1.     Obtinerea si caracterizarea unor noi micro si nanostructuri compozite cu aplicatii in ingineria tisulara, CNCSIS, A, 2004-2006.

2.     BIOMAT – ISMMA, Academia Roam‰nă, 2006.

3.     Studii in vitro privind leziunile oxidative induse de expunerea profesionala la metale grele in fibroza pulmonara asociata sau nu cu cancer, VIASAN (2004-2006)

4.     Dezvoltarea unor biotehnologii de cultivare a unor celule umane in scopul aplicarii in practica medicala, BIOTECH 2004-2006.

5.     Modelarea campului electromagnetic in conditii specifice expunerii utilizatorilor de telefonie mobila CNCSIS, A, 2002-2004

6.      Proteza inteligenta de membru superior cu comanda mioelectrica, RELANSIN 2156/2004

7.     Dispozitiv computerizat de precizie pentru recuperarea ortopedica a membrului superior/, RELANSIN 2134/2004

8.     Motor pentru echipament computerizat, de precizie, folosit in recuperarea articulara a membrului inferior in Echipament computerizat, de precizie, folosit in recuperarea articularaa membrului inferior, proiect RELANSIN 1674/2003.

9.     Modelarea campului electromagnetic in conditii specifice expunerii utilizatorilor de telefonie mobila, Grant A, CNCSIS 469/2003.

10.  Grant Banca Mondiala CNCSIS 76/4D, 40625/27.09.2000, PU-MAGNAT: Program de pregatire postuniversitara  – studii aprofundate si doctorat, ”n domeniul magnetismului tehnic si aplicat, 2000-2002.

11.  Research on electromagnetic phenomena in industrial cells of electrolysis made Aluminum for increasing their technical and economical performances, ALEL INCO/COPERNICUS Project, no. IC15-CT96-0714 (DG12-NNAE), 1997-2000.

12.  ANSTI 836/96, Act ad. 334/99/II, Tema B26, Acuratetea modelarii numerice a structurilor anatomo-fiziologice.  Studii calitative si cantitative cu aplicatii ”n ingineria electrica medicala

13.  Relativitatea restr‰nsa ”n inginerie.  Formularile complementare ale sistemelor de coordonate, ANSTI, 836, tema B51, 1999.

14.  Procedee tehnice si modelare numerica ”n electrostimularea tesuturilor biologice excitabile, beneficiar Ministerul Cercetrii si Tehnologiei, Contract nr. 2-96-6, Tema A113, 1997.

15.  Procedee tehnice si modelare numerica ”n electrostimularea tesuturilor bilogice excitabile, 836/1, Tema B 62, 1996.

16.  Research Grant-in-Aid no. 06650208 from the Ministry of Education, Science and Culture of Japan, 1996.

17.  C‰mpurile electrice si magnetice de joasa frecventa produse de instalatiile electrotehnice, factor de poluare electromagnetica a mediului biologic, beneficiar Ministerul Cercetrii si Tehnologiei, 510 B, Tema B 3, 1995.

18.  Research Grant  RAL R01664-01, Duke University, beneficiar IBM, Research Triangle Park, NC, USA, 1993.

19.  Studies in Convective Cooling of Electronic Packages II, 1993 - 1994 Research Grant, North Carolina Supercomputing Center, Research Triangle Park, NC, USA.

20.  Optimal Geometries for Microchannel Heat Sinks, 1992 - 1993 Research Grant CBT920007P, Pittsburgh Supercomputing Center, PA, USA.

21.  Studies in Convective Cooling of Electronic Packages I, 1992 - 1993 Research Grant, North Carolina Supercomputing Center, Research Triangle Park, NC, USA.

22.  Calculul complet al reactantelor, fortelor si solicitarilor mecanice ”n ”nfasurari si ”n izolatia principala pentru transformatoare, Contract nr. 2-9-1 / 1989, beneficiar ICSIT - MTAE Craiova.

23.  Pachet de programe destinat simularii circuitelor logice la nivel de porti cu luarea ”n consideratie a timpilor de propagare specifici acestor elemente, Contract nr. 2-7-13/ 1987, beneficiar ITCI, Bucuresti.

24.  Echipament electrotehnic pentru instalatia de laborator desti­nat studiului solidificarii materialelor metalice, Contract nr. 3-2-5 / 1982, beneficiar ICPPFTA, Bucuresti.

25.  Instalatie de turnare ”n c‰mp magnetic, ICPPFTA, Contract nr.16 / 1982, f. 2.2, beneficiar Centrul National pentru Industria Aeronautic Rom‰n (CNIAR).

 

G. Rapoarte, seminarii si comunicari

 

Internationale

1.   Morega, Al.M., Invited lecture on Industrial Electromagnetics, COMSOL Conference, Praga, 26-27 Octombrie, 2006.

2.   Morega, A.M., Nishimura, T., Double Diffusion Convection, Tuesday, February 7, 2006, Center for Advanced Power Systems, Florida State University, USA.

3.   Morega, Al.M., Invited lecture Comsol multyphisics – a sense of , COMSOL Workshop, 15 November, 2005, Budapesta.

4.   Morega, Al.M., Ordonez, J.C, Vargas, J.V.C., Masson, P.J., Thermal sizing model for HTS motors stators – preliminary study, CAPS-FSU, Fl, USA, Feb. 2005

5.   Morega, Al.M. and Faur, S.C., A FEM analysis of biomagnetic fluid mixing in a rectangular cavity induced by the action of a magnetic field, Colocviul National de Mecanica Fluidelor si Aplicatiile ei, Caius Iacob, UPB, Fac. Energetica,Bucureşti, 15-16 Oct. 2004

6.   Morega, A.M. Magnetic control of double diffusive convection transport processes in electroconductive melts, Yamaguchi University, Tokiwadai, Ube, 755, Japan, 30 Iulie, 2001.

7.   Morega, Al.M., Nishimura, T., Bian, Y. and Kunitsugu, K., Laminar transport processes in ducts with cross-sectional periodicity, Conferinta Nationala Caius Iacob, 2001, Academia Romana

8.   Seminarul ICONIC/SCADA - SIS International, reprezentantul in Romania al firmei ICONICS din SUA si Catedra de Masini Materiale si Actionari, Facultatea de Electrotehnica, Universitatea POLITEHNICA din Bucuresti, 7 noiembrie 2000, ora 9,30, Universitatea Politehnica Bucuresti, Facultatea de Electrotehnica, (Holul EA)

9.   Morega, Al. M., Paceagiu, B. and Panaitescu, A., Magnetic field influence on transport processes in a convective system, Conferinta anuala Caius Iacob de mecanica fluidelor si aplicatiile ei tehnice, Universitatea Babes -Boliay, Cluj-Napoca, Octombrie 1998.

10.Morega, Al. M., Pulsatile Flow Vortex Dynamics in Periodically Grooved Channels, Conferinta internationala Analysis and Control of Differential Systems, Universitatea Ovidiu din Constanta, 15 - 19 Septembrie 1997.

11.Morega, Al. M.,  Seminar asupra modelrii fenomenelor convective dublu-difuzive, Yamaguchi University, Tokiwadai, Ube, 755, Japan, August 27, 1996.

12.Mocanu, C. I. and Morega, Al. M., Intorduction to Hertz's SR - a complementary theory to Einstein's SR, the Institute for Basic Research Workshops, August 8-13, 1995, Monteroduni, Italy.

13.Morega, Al. M. si Morega, M., A qualitative approach to the eigenvalue cardiography, the Institute for Basic Research Workshops, August 8-13, 1995, Monteroduni, Italy.

14.Morega, Al. M.,  Seminar asupra racirii circuitelor si dispozitivelor electronice, Auburn University, AL, USA, Mai 1993.

15.Mocanu, C., I., Morega, M. si Morega, Al., M., Thomas Rotation. An unsolved paradox, Frontiers of Fundamental Physics. International Conference, Olympia Greece, 27 - 30 September 1993.  Second proceedings.  Quantum Physics with real waves.  Einstein locality and Bell's theorem.  Lorenz relativity. Hadronic Press.

16.Morega, Al. M.,  Forced Convection Cooling of Electronic Devices, raport intern IBM - Duke University, NC, USA Octombrie 1992.

17.Morega, Al. M.,  Raport preliminar asupra lucrarilor proiectului RAL R01664-01, IBM - Research Triangle Park Division, NC, Martie 1992.

18.Morega, Al. M. and Minciunescu, P. Electrostatic qualification of high and very high voltage cape - rode insulators, Proceedings of the 8th Annual Review of Progress in Applied Computational Electromagnetics, ACES, the Naval Postgraduate School, Monterey, CA, USA, 1992.

 

Nationale

 

1.     Morega, Al., Problema directa si inversa ECG, Modelare Matematica ”n Stiinlele Vietii, UPB, Facultatea de Electrotehnica, Laboratorul IEM si Inst. Matematica Aplicata Caius Iacob, Academia Rom‰na, 9 Februarie 2002, EA009.

2.     Morega, Al.M., Nishimura, T., Bian, Y. and Kunitsugu, K., Laminar transport processes in ducts with cross-sectional periodicity, Institutul de Matematica Aplicata Caius Iacob, Academia Romana, Bucuresti, 2001.

3.     Morega, Al.M., Nishimura, T. si Kuni, T. Modelarea convectiei dublu difuzive ”ntr-un sistem salin stratificat, Universitatea Tehnica din Brasov, 1999.

4.     Ion, S. si Morega, Al.M., Filtrarea oscilaţiilor Gibbs cu aplicatie la metoda spectrala de colocatie Ceb‰sev, Universitatea Tehnica din Brasov, 1999.

5.     Morega, Al.M., Mediul de dezvoltare MATHEMATICA pentru probleme la limita ”n inginerie, Academia de Studii Economice, organizat de reprezentanta Wolfram Research la Bucuresti, Iunie 1999.

6.     Morega, Al.M., Paceagiu, B. and Panaitescu, A., Magnetic field influence on transport processes in a convective system, Conferinta Nationala Anuala de Mecanica Fluidelor si aplicatiile ei Tehnice Caius Iacob 18-20 Sept. 1998,

7.     Morega, Al. M.,  Modelarea pseudo-spectrala a proceselor convective dublu-difuzive ”n incinte rectangulare,  Facultatea de Matematici, Universitatea din Bucuresti, Octombrie 1996.

8.     Morega, Al. M.,  O metoda de colocatie integrala pentru rezolvarea unei probleme de transfer termic convectiv cu schimbare de faza,  Facultatea de Matematici, Universitatea din Bucuresti, Aprilie 1997.

9.     Morega, Al. M.,  Fenomene dinamice specifice curgerii pulsatorii ”n canale cu obstacole, Colocviul Mecanica Fluidelor si aplicatiile ei tehnice, UPB, 13 - 14 Oct. 1997, Bucuresti.

10.  Morega, Al. M., Morega, M.,  Modelarea numerica a unor proceduri de stimulare electrice si magnetice cu aplicatii ”n cardiologie, Congresul National de Cardiologie, Mai, Spitalul Clinic Fundeni, Bucuresti, 1997.

11.  Morega, Al. M., Morega, M.,  Probleme ”n modelarea numeria a stimularii electrice cardiace, computer poster, Congresul National de Cardiologie, Oct. 1- 4, Hotel Parc, Bucuresti, 1997.